Low Noise Belt-type Ventilation Fan Box from China Suppliers and Factory - Ideal for Varied Operating Conditions
1. The HTFC type cabinet-type centrifugal fan is a high-efficiency, low-noise cabinet-type centrifugal fan. The product consists of a low-noise forward-tilted multi-blade centrifugal fan, motor, bearings, transmission components, and a sound-absorbing box. Depending on the installation location, it offers 12 different angle inlet and outlet positions to meet the user's different installation needs. According to different fire protection and ventilation requirements, it is divided into two types: A type and B type. The A type motor is installed outside the box and is used for fire smoke exhaust, in accordance with the CCCF regulations, it is named "Centrifugal Fire Smoke Exhaust Fan", and has undergone high-temperature tests in accordance with GA211-2009 "Fire Exhaust Fan High-Temperature Resistance Test Method" by the National Fire Safety Certification Center and obtained CCCF certification. The fan can operate continuously for 60 minutes at a temperature of 280°C. The B type motor is installed inside the box and is used for ventilation and air exchange.
2. The fan is divided into 12 specifications ranging from 9" to 40", with a series air volume of 1650 to 112619 m3/h and a total pressure of 152 to 1124 Pa. After continuous improvement and development, the HTFC type cabinet-type centrifugal fan can be divided into two types: I and I. Type I is a single-speed type, and Type I is a dual-speed type, equipped with a dual-speed motor to achieve two-speed speed regulation, meeting the user's needs for performance adjustment at different operating conditions. The fan can also be equipped with a variable-frequency motor and a variable-frequency controller to achieve variable-frequency speed regulation. It is recommended to set the adjustment frequency within the range of 25Hz to 50Hz.
3. To meet the requirements of explosion-proof environments, the fan can be made into an explosion-proof fan, with an explosion-proof grade of EXdIIBT4, suitable for places with flammable and explosive gases.
4. To meet the noise requirements of different locations, the fan can be equipped with different lengths of mufflers, or the muffler-type box body of the fan can be thickened to reduce the fan noise.
5. The fan can be equipped with primary, secondary or high-efficiency filters to improve the cleanliness of the air. When configuring filters, the actual pressure loss should be considered, and the length of the fan box body should be appropriately increased.
Fans can be widely used in various places such as hotels, restaurants, auditoriums, theaters, basements, factories and mines, office buildings, etc. for ventilation and smoke removal. They are particularly suitable for places that require low noise and large air volume for ventilation and smoke removal.
Type A features an external motor configuration designed specifically for high-temperature fire smoke exhaust, capable of continuous operation for 60 minutes at 280°C. Type B houses the motor internally inside the box, optimized for general ventilation and continuous air exchange.
Available in 12 standard specifications from 9" to 40", the series delivers an airflow capacity ranging from 1,650 to 112,619 m³/h with total pressure metrics running between 152 and 1,124 Pa.
Yes. The system is available in single-speed or dual-speed models to match dynamic operational demands. Additionally, it can integrate with variable-frequency motors and controllers, with an optimal operating frequency between 25Hz and 50Hz.
Yes, the fan can be manufactured with an explosion-proof classification of EXdIIBT4, rendering it safe and compliant for environments containing flammable and explosive gases.
The fan is built with a sound-absorbing cabinet structure and can be customized with varying lengths of silencer sections or an increased cabinet wall thickness to fulfill strict low-noise requirements.
Yes, primary, secondary, or high-efficiency filters can be installed to enhance indoor air cleanliness, provided the cabinet length is appropriately extended to account for expected pressure loss.








